What happens when one of the world’s most exclusive watchmakers joins forces with one of motorcycling’s most exotic marques? Alan Cathcart straps in to find out

For Formula One GP fans, the name Richard Mille has become synonymous with success on four wheels. Reigning world champions McLaren have been paired for over a decade with the luxury Swiss-based watchmaker founded in 2001 by French horologists Mille and Dominique Guenat, whose 500 employees currently make just under 6000 timepieces a year in their factory in French-speaking Switzerland. That’s just a tiny fraction of the production of, say, over a million Rolex watches a year, a deliberate scarcity which, combined with high demand, results in significant waiting lists and makes them highly sought-after on the secondary market.

So when McLaren’s 2025 F1 world champion Lando Norris and his Aussie teammate Oscar Piastri made their increasingly frequent visits to the post-race podium last season, they had to be sure to slip the latest and greatest Richard Mille creation onto their wrists before being interviewed, retaining it for the trophy presentation and inevitable champagne shower.

Just as well such objects are waterproof!

But with McLaren no longer enjoying the dominance that carried it to last year’s title, the company’s other sponsored F1 team since 2021, Ferrari, has stepped to the fore, ensuring the Richard Mille name remains clearly visible in cockpit shots.

Seven-time world champion Sir Lewis Hamilton is himself a serial collector, having amassed over a dozen Richard Mille watches reputed to be worth more than $10m.

However, the creation of a motorcycle bearing Mille’s name owes more to the eponymous watchmaker’s appreciation for fine design and exquisite engineering on two wheels than any desire to extend his company’s reach into the upper stratosphere of two-wheeled bling. Mind you, at an even €200,000 + tax (around $A322,000), the 150-off Brough Superior RMB-01 that debuted on the world stage a year ago carrying the Mille name has a pretty heady price tag. But with 52 examples already ordered, paid for and delivered, it looks like BS boss Thierry Henriette and Monsieur Mille have priced their joint creation just right.

But how did this partnership come about?

 

CHANCE ENCOUNTER

“It happened completely by chance,” says Albert Castaigne, Executive Director of Brough Superior Motorcycles, and as such responsible for marketing the products of the company’s Toulouse factory. He’s also in charge of supervising production of the series of exquisitely detailed and innovatively designed models created by company CEO Henriette to emanate from there carrying both the Aston Martin and Brough Superior badges.

“It came about from an encounter at the 2019 Retromobile in Paris, a world-leading classic car show. Richard was an exhibitor there, same as us, and he came to our stand, and remained a long time on his own examining the bikes closely. Then someone advised me who he was, so we got together and I invited him to come to visit our factory – he didn’t know our bikes are made in France.

Albert Castaigne talks Alan Cathcart through the basics before a very expensive track session starts

“When he came to visit us, he and Thierry hit it off big time, and we decided right then to make a motorcycle together. Richard is a motard – he has some bikes and rides himself, although above all he’s a classic car enthusiast, with a big collection of sports cars. But he likes mechanical objects and admires the processes we use to create our hand-made motorcycles – there’s a definite similarity with creating luxury watches. The project really started in 2023, and after all the legal side was finished he and Thierry worked in close collaboration for 18 months, producing 12 different iterations of the design before arriving at a common vision – and the RMB-01 which debuted last year is the result.”

Everywhere you look you see handcrafted excellence on show

 

BILLETPROOF

This motorcycle employs Brough Superior’s liquid-cooled 88º 997cc V-twin engine made in-house at its Toulouse factory, with its cylinder angle reduced by two degrees at the crankcase from the more normal 90º format, which delivers perfect primary balance. This allows 30mm to be saved between the cylinder heads without having to use a counterbalancer to smooth out undue vibration. The CNC-machined exoskeletal aluminium twin-sided swingarm rotates in the horizontally split crankcases, the upper half of which incorporates the Nikasil-lined cylinders.

The big V-twin engine is carved out of a solid block of aluminium

The eight-valve engine measures 94mm x 71.8mm, with forged steel conrods sitting side by side on a shared crankpin, and the forged crankshaft running on plain bearings. The conrods’ plain-bearing small ends carry forged three-ring pistons, with a two-stage oil pump chain-driven directly off the crank and incorporating secondary drive to the water pump. There’s composite camdrive to the pair of four-valve cylinder heads, comprising a Morse chain for each cylinder driven directly off the crank, running to an intermediate gear pinion situated immediately beneath the twin overhead camshafts in each cylinder head, both of which this drives directly.

Lewis Hamilton and his Ferrari teammate Charles Leclerc put on their Richard Miller watches

The paired steel valves – 35mm inlets and 31mm exhausts, each fitted with a single valve spring – sit at a 26º total included angle to each other and are directly operated via buckets. There are twin 50mm Synerject throttle bodies, each with a single injector and RBW digital throttle governed by Brough’s own ECU, but without any choice of riding modes.

However, beyond its overall format, this RMB-01 engine is different from any other modern Brough Superior engine in that it’s entirely carved out of solid billet, with its major castings such as crankcases and cylinders replaced by components CNC-machined from a block of AL5000 aluminium. This results in a combined weight of just 23kg for all the parts thus carved out of a single chunk of metal which originally weighed 160kg. There must have been a lot of swarf!

The result is a markedly stiffer engine compared to the cast one, allowing it to be used as a full structural component of the chassis, whilst a new cylinder design with wet cylinder liners helps improve cooling. It’s the same engine used in the Aston Martin AMB 001 Pro, but there it’s turbocharged whereas on the RMB-01 it’s normally aspirated.

Winglets are a nod to current superbike fashion

The resulting powerplant weighs just 70kg without throttle bodies, helping reduce the dry weight of the complete bike to 170kg, vs the 200kg of the current Dagger model with the cast engine. The stronger engine design allows the rev ceiling to be raised to 10,500rpm, up 900 revs compared to before. In this normally aspirated guise – the first time the new engine has been made available in this form – power has been lifted to 97kW (130hp) at the crank at 10,250rpm, up from 76kW (102hp at 9600rpm on the Dagger. This is transmitted via a six-speed extractable cassette-type gearbox made by CIMA in Italy, and an Adler/APTC oil-bath slipper clutch.

 

FRONT & CENTRE

The stiffer engine means that the already vestigial frame can be further reduced in size, with the front CNC-machined frame now a shorter composite aluminium and titanium one shrouded in carbon fibre, via which the front suspension is essentially just bolted to the front cylinder head.

As ever, the RMB-01’s front suspension is the most immediately eye-catching of the many avant-garde features on this very special Brough.

Now that’s a different take on a digital dashboard, referencing the link between a famous timepiece and motorcycle technology

Nowadays employed on all Brough Superior (and Aston Martin) models, this is based on the wishbone fork design created by French engineer Claude Fior and raced to points-scoring finishes in the FIM Endurance series some two years before the first bike bearing the similar Hossack format was created. The fourche Fior was also later copied by John Britten on his V-1000 racer, as well as by BMW on the Duolever front end fitted to its K-series models, since the race-minded Claude Fior omitted to patent it!

The Brough looks compact and very purposeful

The twin wishbone struts, set at a 22.90° rake with 86.90mm of trail, are CNC-machined from aluminium billet with twin articulated titanium triangular links, and carry a front Donerre monoshock adjustable for spring preload and rebound damping, with just 85mm of wheel travel. At the rear, the twin-sided swingarm pivots in the engine crankcases, with another Donerre monoshock now fully adjustable for spring preload plus compression and rebound damping, and a progressive-rate link yielding 113mm of travel.

What Sir Al described as excessive ground clearance can be clearly seen in this shot

Donerre is a French competition suspension specialist located near Toulouse which has developed a series of dedicated shocks for Brough Superior and now Aston Martin models. Brough ditched Öhlins for them, so they must be good! Likewise a local concern, Beringer has long supplied Boxer, Brough and now Aston Martin with brakes, and its twin 320mm front discs on the RMB-01 are gripped by radially mounted four-piston Monobloc calipers.

 

TRACK TIME

My chance to sample this joint venture in exquisitely executed engineering came in July under sunny skies at the Spanish seaside track of Calafat, 450km/five hours south of Brough’s home base.

Just glimpsing the trio of bikes standing in the sunlight, each in a different one of the three liveries available, made me appreciate the huge amount of truly artistic detail that’s gone into their creation. By any standards, this is a lovely motorcycle, with its distinctive looks accentuated by the gracefully curved vestigial spoiler wrapped around the tiny headlamp cluster as a nominal but emphatic nod to the current trend for aerodynamic winglets.

The twin-sided swingarm pivots in the engine crankcases

However, before taking the Mille motorcycle bearing a plaque identifying it as No.003/150 out for a dozen tours that afternoon of a track that I’ve carved literally hundreds of laps on down the years, as well as raced at with a modicum of success, I’d sampled it for size – and found that at 180cm tall I practically needed a stepladder to climb aboard the supposedly 808mm-high seat, which was also very wide where it met the fuel tank. I reckon they might just need to re-measure that, because once aboard I could only j-u-s-t touch the toes of both boots down on the ground simultaneously.

Machined 17in aluminium wheels are a work of art

It felt unbelievably precarious, since after firing up the extremely raucous-sounding V-twin engine, whose twin exhausts are devoid of any silencing – okay, Track Use Only, but how many tracks these days besides Calafat have no noise limits!? – I had to lean the bike right over to the side so I could put my right foot to the ground to find neutral with my left, using the one-up race-pattern gearshift to get ready for launch. Luckily, initial pick-up was strong rather than violent, so I didn’t find myself skidding off the line sideways in obtaining forward motion via the light-action clutch.

Thierry Henriette is a visionary

Still, once straightened up and flying right, I could pin the RMB-01’s throttle firmly open as we streaked down the Calafat pit straight. However, I couldn’t help thinking that what I was in fact sitting on was a beautifully designed, plushly upholstered plank of carbon fibre that had been shaped to look good rather than be dynamically effective.

Three subtly different paint options for customers

And the ride height of the whole bike needs to be dropped at least 30mm – it’s much too tall. While after having ridden all his various racebikes I know Claude Fior was an avid exponent of tall motorcycles in order to promote weight transfer in pursuit of extra grip, but I never did agree with him that a tall bike’s needed to get the best out of his front-end design, as here. The RMB-01 felt downright ungainly because of its tall ride height in flicking from side to side through Calafat’s twisting turns – although the way it drove so strongly out of the final third-gear sweeper onto the pit straight was really satisfying.

The 88º 997cc V-twin engine weighs just 70kg

Indeed, clocking up the laps aboard the Richard Mille Brough while trying increasingly unsuccessfully to forget the mega price tag brought a smile to my face thanks to the nicely mapped throttle response from the punchy, potent V-twin engine – well, so long as I kept moving along reasonably quickly and didn’t have to cope with its low-speed instability in some of Calafat’s tightest turns!

 

OLD SCHOOL

There’s a strong yet smooth but completely insistent shove all the way through the rev band from 4000rpm upwards to the nominal 10,500rpm peak, which in practice you won’t go anywhere near. Seeking a higher gear at 8000rpm via the six-speed CIMA gearbox’s slightly notchy but still precise shifter will see you right back in the meaty section of the uber-flat torque curve – and, by the way, there’s no powershifter on this motorcycle, nor, as mentioned, any riding modes. This is pure old-school motorcycling, untainted by any electronic intervention… just like a Richard Mille watch!

No other motorcycle in the world today looks quite like this

Anyway, the Brough engine’s wide spread of torque means you can cut right back on shifting gear; it’ll pull seamlessly from under 3000rpm all the way to eight grand, with zero undue vibration. In terms of engine performance, this would be a satisfying street ride with heaps of attitude and a wide spread of torque – but only if it was lower and quieter!

 

FIOR PLAY

There are several effective benefits of the Brough’s wishbone fork design, including the separation of steering and suspension functions, so that the front suspension doesn’t freeze when you trailbrake into a turn, on the angle. There’s also superior suspension compliance, thanks to a fully adjustable shock eliminating the stiction problems of any telescopic fork, plus inherent anti-dive, reducing weight transfer and maintaining constant steering geometry. The rigid upright only permits the wheel to travel up and down in a true vertical plane, even under the heaviest braking possible, with zero fork deflection under braking.

There’s lower unsprung weight, too, leading to improved suspension compliance, while the wishbone fork potentially offers adjustment of trail, head angle, wheelbase, ride height and weight distribution, as well as easier fine-tuning of suspension settings than is possible on even the most sophisticated telescopic fork. Add in the enhanced stiffness-to-weight ratio of a wishbone front end compared to a tele fork, and you can appreciate the fanatical belief Claude Fior possessed in the worth of his design, which BMW engineers later recognised, and which Thierry Henriette today incorporates in all new Broughs and Astons, including the RMB-01.

Castaigne’s chance encounter with watchmaker Richard Mille led to a very special bespoke model

You can experience these benefits very quickly on the Mille, by the way it soon becomes second nature to trailbrake hard and late into a turn without fear of the fork freezing. However, once committed to that, you must never release the brake lever and then come back for more, because if you do the bike will sit up and head for the hedges via pronounced understeer – it requires a very precise, confident riding style.

A winged spoiler wraps around the tiny headlamp cluster

But Henriette has retained just sufficient front-end dive in the system to give someone unfamiliar with alternative front ends the sense that the bike is actually slowing when you squeeze the front brake lever hard. As it does, for that very potent Beringer brake package is really effective at stopping this fairly light package for a one-litre V-twin musclebike scaling 170kg dry, aided by the fair degree of engine braking still provided on the overrun by the Adler slipper clutch.

Plenty of grunt in a straight line but seat height compromised handling in very slow corners

Henriette and Mille have produced a great-looking bike that almost surprises you by turning out to be rideable – if not very easily, and only at a racetrack without a noise meter, plus it’d be even better if it lost some height! But is the devil in the detail? As in, calling this bike the RMB-01 presupposes there might be an RMB-02 version that’s both street legal and sanitised structurally, without losing any of the devastating allure its joint creators have created here…

Without dismissing it outright, Albert Castaigne wouldn’t be drawn on this possibility, in which case there’s only one answer: Watch this space…! 

 

✅ PROS – Exquisite engineering and finish, punchy torque-rich V-twin, superb Beringer brakes and Fior front-end feel.

❌ CONS – Far too tall and ungainly, track-only exhaust limits usability, $322k-plus price makes it seriously exclusive.

 

SPECIFICATIONS

ENGINE
997cc liquid-cooled DOHC 88° V-twin
Bore & stroke 94mm x 71.8mm
Compression 11:1
Power 97kW (130hp) @ 10,250rpm
Fuelling Synerject EFI, twin 50mm throttle bodies
Transmission Six-speed, Adler slipper clutch

FRAME
Type CNC-machined aluminium/titanium, engine fully stressed
Rake/trail 22.9°/86.9mm

SUSPENSION
Front Fior-type aluminium wishbone, Donerre monoshock, preload/rebound adjustable, 85mm travel
Rear Aluminium swingarm, Donerre monoshock, fully adjustable, 113mm travel

BRAKES & TYRES
Front Twin 320mm Beringer discs/four-piston radial calipers
Rear 230mm disc/two-piston caliper
Tyres Michelin Road 6; 120/70 R17 (f), 200/55 R17 (r)

DIMENSIONS
Wheelbase 1493mm
Seat height 808mm
Weight 170kg dry

BUSINESS END
Colours Nocturnal Sapphire (midnight blue), Selene (matt grey with orange), Pearl of Speed (pearlescent white with red flashes)
Price €200,000 + tax (approx $A322,000)
Manufacturer Brough Superior Motorcycles SAS, Toulouse, France

 

ROAD TO FRUITION

Sir Al had a hunch Brough Superior’s latest exotic might spawn something for the street. He didn’t have to wait long to be proved right

When I tested Brough Superior’s extraordinary RMB-01 in July, I wondered whether Toulouse might one day produce something equally exotic that could actually be ridden on the road. I didn’t have to watch this space for long.

Aston Martin has now unveiled its first street-legal motorcycle, the AMB 002 Roadster. Developed in conjunction with Brough Superior, which will manufacture the model at its factory in Toulouse, the new machine represents the latest chapter in the seven-year partnership between these two iconic British brands. That collaboration began with the turbocharged 136kW (182hp) Aston Martin AMB 001 in 2019, followed in 2022 by the even more extreme 168kW (225hp) AMB 001 Pro. Both were exquisitely engineered, eye-wateringly expensive and strictly track-only.

Styling elements reference Aston Martin’s famous cars

Now Aston Martin and Brough Superior have answered customers who wanted something they could actually ride on the road.

Deliveries of the AMB 002 Roadster are targeted to begin in Q3 2027 at a price of €120,000 ($A193k), with production limited to 300 bikes. All will be Euro 5+ compliant, allowing them to be road registered in markets around the world, including Australia.

“That’s the reason for the delay in starting production,” says Albert Castaigne, Brough Superior Motorcycles ED. “We have a heavy ongoing homologation program to achieve Euro 5+ that we need time to complete. But it’s very important for both Aston Martin and ourselves that this bike has the potential to be road legal in all developed markets, including the USA, Japan and Australasia, and anywhere in the EU – and Britain, too.”

Unlike the two previous turbocharged models, the AMB 002 is powered by a new normally aspirated, liquid-cooled DOHC 88° V-twin developed and manufactured in-house. Measuring 98mm x 71.8mm, the 1083cc engine has a 4mm larger bore than the previous 997cc unit. As on the AMB 001 Pro, major components including the crankcases and cylinders are CNC-machined from solid AL5000 aluminium billet. The 70kg engine helps keep the bike to 190kg despite twin catalysts and all the necessary road hardware being fitted.

Bigger valves and an all-new cylinder head with enhanced flow and optimised porting, twin 50mm Synerject throttle bodies, a 2-1 exhaust and 13:1 compression ratio help produce 97kW (130hp) at 8200rpm. More significant for a road bike is the 113Nm of torque delivered at just 6500rpm.

“Our aim is to make this bike super enjoyable to ride on the highway,” says Castaigne. “We have a really broad spread of torque which helps achieve that. We want to make it sporty to ride, but not too much – this is a real-world road bike!”

Drive is through a six-speed extractable cassette-type CIMA gearbox and Adler/APTC oil-bath slipper clutch. The new V-twin sits in a minimalist frame milled from solid titanium billet to form a structural spine, with the engine acting as a fully stressed chassis component via a CNC aluminium subframe. Weighing just 5kg, the chassis helps achieve a claimed 50/50 weight distribution across the 1472mm wheelbase. Carbon fibre is used for all the body panels and the 18-litre fuel tank, helping centralise mass and lower the centre of gravity. And yes, the distinctive double-wishbone Fior front suspension you’ve just read about on the RMB-01 is here, too. For the AMB 002 it employs CNC-machined aluminium wishbones and a Donerre monoshock adjustable for spring preload and rebound damping, providing 100mm of wheel travel.

At the rear, the billet aluminium twin-sided swingarm pivots in the engine crankcases and works through a fully adjustable Donerre monoshock with 130mm of travel. Beringer supplies the braking hardware, with twin 320mm front discs and radially mounted four-piston Monobloc calipers backed by a 230mm rear disc and twin-piston caliper.

Sir Al on an AMB 001 at the 2022 Goodwood Festival of Speed

But arguably the biggest departure from the Brough Superior sitting on the preceding pages is what wraps around all that engineering. The ultra-distinctive carbon fibre bodywork was created by the Aston Martin Design Studio led by the company’s Executive Vice President and Chief Creative Officer, Marek Reichman, himself a motorcycle nut and Ducati owner.

The AMB 002’s curvaceous styling is dominated by the pebble-smooth fuel tank and side fairings, with crescent-shaped gills cut into the flanks to aid engine cooling and airflow. Low-slung mirrors sit on delicate wire-design stalks, while several details make a direct connection to Aston Martin’s four-wheeled exotica.

The company’s iconic side-strake has been reimagined to pierce the side fairing and extend forwards around the headlamp. Twin oval exhausts feature ribbed heat sinks echoing those of Aston Martin’s Vanquish, DB12 S and DBX S, while the dramatic rear light blades recall the Vulcan, Valkyrie and Valhalla hypercars.

Sir Al astride an AMB 001 Pro at Goodwood earlier this year

Keyless operation, a backlit ignition button and hand-crafted saddle leather seat pads add further touches borrowed from Aston Martin’s road cars.

Seat height is a substantial 875mm, but Castaigne insists you won’t need to be built like a basketballer to manage it: “The stepover is really narrow where it meets the fuel tank shroud. In recognition of the fact that it’s a road bike where you must be able to stop at a light without falling over, it’s much easier to put your feet on the ground than with the track-day models, on which by definition you only ever stop at the pit boxes!”

“Having created two of the most remarkable track-only motorcycles ever built in the AMB 001 and AMB 001 Pro, it was always our long-term dream to make an Aston Martin motorcycle for the road,” says Reichman. “The AMB 002 is the vivid expression of our shared passion for sculptural, visceral, covetable machines. It promises an ownership and a riding experience unique in the world of motorcycling.”

The proven V-twin engine has been taken out to 1083cc

“Nothing else on the highway will look like this,” added Brough Superior boss Thierry Henriette. “It is truly one of a kind, both in its design and in the riding experience it delivers. The rider’s upright posture and the completely unobstructed field of vision combine to create a unique feeling of gliding above the road, with absolute confidence and complete control. It sets a new standard in road bike performance.”

The AMB 002 has been unveiled in satin-finished carbon fibre with a black Cerakote engine and suspension, but will eventually be offered in five official colours. For more information, visit broughsuperior.com.au